MA SCANCOMMANDER User Manual page 49

Scancommander Scancommander Scancommander Scancommander Scancommander
Starting block operations
Selecting steps
Four different block
operations
Cancelling block mode
eMail: info@malighting.de . Tel.: + 49 9 31 49 79 40 . User's Manual Scancommander
1. x MAKE BLOCK
Inverts the display square. The block operation mode
starts, where a complete set of steps can be handled
simultaneously.
Encoder 1
Selects steps for the following block operations. The
numbers of the selected steps get inverted.
2. x MAKE BLOCK
The sections on top of the display show the different
block operations available.
MOVE
COPY
BLOCK BLOCK
1.0
EDIT
2.0
2.1
2.2 SEQUENCE:
3.0
STEPS: 6
3.5
FREE:
......
7
Encoder 1
Selects a new step number.
MOVE BLOCK
Moves the sequence of steps, marked as block, to
the new address. The total number of steps remains
unchanged.
COPY BLOCK
Makes a copy of all the steps in the block and inserts
these steps at the new address
DELETE BLOCK
Deletes all steps marked as block and shifts the
following steps ahead.
CANCEL BLOCK
Cancels the block operation mode and returns to the
modify menu.
CANCEL
DELETE
BLOCK BLOCK
BLOCK
SEQUENCE
START:
1
STEP 3
END:
(94770) STEP 5
INFO
49 49 49 49
49