Live Recording Of A Time Code Show - MA SCANCOMMANDER User Manual

Recording a show
SMPTE menu
Select record mode
Start Time Code
Record events
58 58 58 58
58
MA Lighting Technology GmbH . Dachdeckerstr. 16 . D-97297 Waldbüttelbrunn . Fax: + 49 9 31 4 97 94 29 . www.malighting.de

7.5.2 Live recording of a Time Code show

The RECORD mode enables to type in the program during running Time Code.
REMOTE at the Top Menu
SMPTE MENU
MODIFY
FRAMES
001
(000)
ON - OFF SMPTE
RECORD
OVERWRITE mode and
RECORD : NEW selected (blocks inverted)
Memory, Chaser, Sequence, Enable, GO+ and GO-
The display shows the SMPTE Menu with a list of the
programmed events.
ON
3 0
00:00:01:15
Parallel to the ON/OFF button in the Remote Top
menu this button will switch on and off the Time Code
input.
Tape playback start
The Scancommander shows the incoming time on the
display as
hours : minutes : second : frames.
Running the show synchronously to the music, the
Scancommander lists all playback commands with
their exact time in the display.
NOTE: The brightness masters are not recorded. Fading
in and out the brightness on Time Code shows has to
be done by recalling appropriate memories or steps.
RECORD
DELETE
EVENT
INSERT
OVERWRITE
RECORD:
NEW
FINE