Modifying A Time Code Program - MA SCANCOMMANDER User Manual

Scancommander Scancommander Scancommander Scancommander Scancommander
Modify mode
Selecting a single events
Changing the event time
eMail: info@malighting.de . Tel.: + 49 9 31 49 79 40 . User's Manual Scancommander

7.5.4 Modifying a Time Code program

Beside the Record mode, single events of a show can also be created or
modified step by step.
REMOTE
SMPTE MENU
MODIFY (block displayed inverted)
MODIFY
009 00 : 00 : 10 : 05
010 00 : 00 : 10 : 15
011 00 : 00 : 11 : 02
012 00 : 00 : 11 : 03
013 00 : 00 : 12 : 15
014 00 : 00 : 13 : 15
015 00 : 00 : 15 : 02
016 00 : 00 : 18 : 03
017 00 : 00 : 18 : 15
(053)
Encoder 1
Encoder 2 and 3
FINE
END OF RANGE
The display shows the SMPTE menu with a list of the
programmed events.
OFF
FRAMES
3 0
MEM. A/02
MEM. A/03
SEQU. 01
GO +
MEM. B/02
MEM. A/05
GO +
GO -
MEM. A/01
00:00:12:15
Scrolls through the list of the programmed events.
Scrolling up will recall the events step by step.
Change the time of the selected event.
When FINE is selected, the encoder will change the
time in single frames or minutes, otherwise they will
do a course adjustment.
Display
The time of an event can only be selected
within the period of the last and the following event.
RECORD
DELETE
EVENT
INSERT
OVERWRITE
RECORD:
NEW
FINE
61 61 61 61
61