Scancommander
Scancommander
Scancommander
Scancommander
Scancommander
Memories and chasers as
steps of a sequence
LINK MEMORY operation
Selection of a step
number
Creating a new step
Linking the step to the
memory section
Selecting a memory or
chaser
Setting speed, fade time
and trigpoint
eMail: info@malighting.de . Tel.: + 49 9 31 49 79 40 . User's Manual Scancommander
6.3.4 Recalling a memory or chaser as step of a sequence
Memories and chasers of the playback section can be recalled as a step of a
sequence. This saves programming time and storage capacity.
EDIT button
Sequenz button 1-16
MODIFY
MODIFY
1.0
2.0
A/01
2.1
B/15
2.2
3.0
3
ENCODER 1
(
)
DOUBLE STEP
LINK MEMORY
MEMORY or CHASER button / PAGE A - D
MODIFY switched off
ENCODER 2
MAKE
LINK
MEMORY
BLOCK
EDIT
SEQUENCE
A 25
SEQUENCE:
STEPS: 5
(94120)
FREE:
NAME
STEP :
2.1
Selection of the step, the memory will be linked to.
Creates a new step which can be linked to the memory
without deleting any step.
Switching on: (block inverted)
Clears the channel values stored at this step and
links the step to a memory. Within the step list in the
display a memory number is shown for this step.
Switching off: (block no longer inverted)
Clears the link to the memory and leaves the step as
a blind step without any channels selected in its
matrix.
Selection of a memory by its playback button.
The speed of a linked chaser, the x-fade time and
trigpoint can be set by the encoders.
EDIT
MATRIX
DELETE
STEP
DOUBLE
STEP
RENAME
STEPS
51 51
51 51
51