Scancommander
Scancommander
Scancommander
Scancommander
Scancommander
Touchboard input
List of input patches
Selection of an input
channel
Linking the input to one of
the playback functions
Activating and terminating
the remote input
eMail: info@malighting.de . Tel.: + 49 9 31 49 79 40 . User's Manual Scancommander
7.1 Remote via Touchboard
7.1.1 Input signal
Located on the SCANCOMMANDERS backpanel is a 25 pin SUB-D connector
(female) which can be used to interface a standard 16 channel touchboard.
Pin 1-16 :
Input channel 1 to 16
Pin 25:
Ground.
The touchboard can only be used to control on and off functions.
0 to +2 Volt : Off
+5 to +15 Volt : On.
7.1.2 Assigning board functions
REMOTE
TOUCHBOA. MENU
EDIT
DELETE
ALL
1 MEM . A / 01
2 MEM . B / 15
3
4 MASTER A
5
6
7
8
Encoder 2
Memory button or
Brightnessmaster flash button
Sequence button 1 - 16 or
GO button
QUIT button
TOUCHBOARD ON/OFF
DELETE
SINGLE
9
10
11
12
13
14
15
16
SELECT
Selecting one of the input channels 1 to 16 (block is
displayed inverted)
Links the selected function to this input channel.
Returns to the REMOTE top menu
Switches the remote input on and off.
EDIT
53 53
53 53
53