Sequence Playback Menu - MA SCANCOMMANDER User Manual

Sequence playback menu

Changing step order by
jumping to another step
number
46 46 46 46
46
MA Lighting Technology GmbH . Dachdeckerstr. 16 . D-97297 Waldbüttelbrunn . Fax: + 49 9 31 4 97 94 29 . www.malighting.de
6.2.7 Sequence playback menu
The MENU button at the sequence section swaps the display to list informa-
tions about the running sequence program.
MENU button
SEQ. 1
(17)
STEP TIME FADE TRIG
02 2.0 5.075 Sec 0.0 00%
03 2.1 0.075 Sec 15 00%
04 3.0 12.00 Sec 1.5 50%
05 3.1 0.00 Sec 0.0 00%
GO
Line one lists the step which was recalled last. Line 2 to 4 show the next
steps. Each line shows step number, indicator of go mode, steptime, fadetime
and triggerpoint.
Right hand a small graphic shows the matrix of the steps (see 4.3),
indicating which channels get affected by this step.
If the step is a LINK MEMORY step, the number and name of the memory is
listed instead of the graphic.
Left side on the bottom line the go mode is shown on black background. If the
next step is a timed automatic, the remaining time is listed on the display.
The graphic right on the bottom line shows which channels are still
controlled by the Sequence. As soon as this graphic is empty and
white, all channels are overwritten by any memory or preset playbacks - the
sequence has no more effect on stage.
GO BUTTON Step Mode or
MAN FADE selected (red LED on)
Stops the running sequence. NEXT is displayed right on
top of the display.
NEXT button pressed and simultaneously
ENCODER 3
Via the encoder any step number can be selected to be
the next step on the sequence.
recalls the menu with number and name of the running
program at the top line. The total number of steps is
shown in brackets.
NAME
NAME / MATRIX
A/10
COLOR CHASER 1
NEXT