Macros; Programming Macros - MA SCANCOMMANDER User Manual

Scancommander Scancommander Scancommander Scancommander Scancommander
Start of programming a
Macro
End of programming a
macro
Macro playback
Deleting a macro
!! ATTENTION !!
eMail: info@malighting.de . Tel.: + 49 9 31 49 79 40 . User's Manual Scancommander

9.5 Macros

The five macro buttons A to E right beside the cue card slot offer the possibility
to sample different key strokes to one single button.

9.5.1 Programming macros

STORE
MACRO A
All buttons but the single scan buttons
ENCODER movements
MACRO A
In case the maximum step number is reached (22-62 depending on the kind of
button), the macro is stored automatically with "MACRO FULL".
Playback of a macro:
MACRO A
Macros can not be listed in the display. All special macros, including any
programming or deleting commands in their list, should be cleared as soon as
they have done their job.
Deleting a macro is done by
- STORE
- MACRO
- MACRO
The display returns to the Top Menu, but a small
display "RECORDING MACRO X" marks that all
following functions are recorded.
including the mouse buttons, get listed in the macro
get only listed within the BACKUP menu
Selecting the macro button a second time closes the
list and stores the macro.
"RECORDING MACRO A" disappears
Every time the macro button is used, the
Scancommander will repeat all listed operations.
71 71 71 71
71