Table of Contents
Advertisement
Daisy chaining a DMX
signal
Remote via DMX
List of input patches
Selection of an input
channel
Linking to one of the
playback functions
Activating and terminating
the remote input
54 54
54 54
54
MA Lighting Technology GmbH . Dachdeckerstr. 16 . D-97297 Waldbüttelbrunn . Fax: + 49 9 31 4 97 94 29 . www.malighting.de
7.2 Remote via DMX input
7.2.1 Input signal
The male DMX 512 input XLR connector on the backpanel can be used to mix
the signals of any lighting console with the control data of the MA
SCANCOMMANDER and send them to the stage on one DMX line. For any
channel which is controlled from both consoles simultaneously, the two values
get compared and the highest level will be sent to stage.
In addition, up to 24 DMX 512 input channels can be used to remote control
single functions on the SCANCOMMANDER.
The pin layout for the DMX 512 input connector conforms with USITT protocol.
Pin 1 = Ground, Pin 2= Data - , Pin 3 = Data +
7.2.2 Assigning board functions
REMOTE button in the TOP MENU
DMX MENU
EDIT
DELETE
DELETE
ALL
SINGLE
22 MEM . A / 04
23 MEM . A / 05
34 MASTER A
40 MASTER B
--
SELECT
Encoder 1
Encoder 3
Playback buttons (the same as on remote via touchboard)
DMX ON/OFF at the Remote top menu
Selection of one of the 24 squares (inverted)
Selection of a DMX input channel.
Links the selected function to the selected DMX
channel.
Switches the remote input on and off.
EDIT
-
- -
DMX
23
Advertisement
Table of Contents
