Setting The Function Codes Data Setting" - IMO Jaguar CUB Instruction Manual

3.4 Setting the Function Codes--"Data setting"
Menu #1 "Data setting" in Programming mode allows you to set function codes for making the
inverter functions match your needs.
To set function codes in Menu #1 "Data setting," it is necessary to set function code E52 data to 0
(Function code data setting) or 2 (Full-menu mode).
The table below lists the function codes available in the Jaguar CUB. The function codes are dis-
played on the LED monitor on the keypad as shown below.
Table 3.5 List of Jaguar CUB Function Codes
Function code group Function code
F codes F00 to F51
(Fundamental functions)
E codes E01 to E99
(Extension terminal
functions)
C codes C01 to C52
(Control functions of
frequency)
P codes P02 to P99
(Motor parameters)
H codes H03 to H98
(High performance
functions)
J codes J01 to J06
(Application functions)
y codes y01 to y99
(Link functions)
Refer to Chapter 5 "FUNCTION CODES" for details on the function codes.
Function codes that require simultaneous keying
To change data for function codes F00 (Protect data), H03 (Initialize data), and H97 (Clear alarm
data) simultaneous keying operation is necessary--
data from being lost by mistake.
Changing, validating, and saving function code data when the motor is running
Some function code data can be changed while the motor is running and some cannot. Further,
amongst the function codes whose data can be changed while the motor is running, there are some
for which the changes can be validated immediately and others for which they cannot. Refer to the
"Change when running" column in Chapter 5, Section 5.1 "Function Code Tables."
ID number in each function code group
Function code group
Function Description
Basic To be used for basic motor running.
functions
Terminal To be used to select the functions of
functions the control circuit terminals.
To be used to set functions related to
the LED monitor display.
Frequency To be used to set application functions
control related to frequency settings.
functions
Motor To be used to set special parameters
parameters for the motor capacity, etc.
High level To be used for high added value
functions functions and complicated control,
etc.
Application To be used for PID control.
functions
Link functions To be used for communications
+ keys or +
3-12
keys. This prevents