Checking I/O Signal Status I/O Checking" - IMO Jaguar CUB Instruction Manual

3.7 Checking I/O Signal Status--"I/O checking"
With Menu #4 "I/O checking," you may display the I/O status of external signals without using a
measuring instrument. External signals that can be displayed include digital I/O signals and
analogueue I/O signals. Table 3.10 lists check items available. The status transition for I/O checking
is shown in Figure 3.8.
If you cannot switch the menu to any other one, set function code E52 data to 2 (Full-menu mode).
Figure 3.8 "I/O Checking" Status Transition
Basic key operation
(1) With the menu displayed, use the
(2) Press the key to display the codes for the I/O check item list. (e.g.
(3) Use the and keys to select the desired I/O check item, then press the
The corresponding I/O check data will appear. For control I/O signal terminal and control circuit
terminal input under communication control, use the
different display methods.
(4) Press the key to return to the I/O check item list. Press the
menu.
and keys to select "I/O check"(
4_00
and keys to select one of the two
key again to return to the
3-20
4. _o
).
)
key.