Chapter 1 Before Using The Inverter; Acceptance Inspection - IMO Jaguar CUB Instruction Manual

Chapter 1 BEFORE USING THE INVERTER

1.1 Acceptance Inspection

Unpack the package and check that:
(1) An inverter and instruction manual (this manual) is contained in the package.
(2) The inverter has not been damaged during transportation—there should be no dents or parts
missing.
(3) The inverter is the model you ordered. You can check the model name and specifications on the
main nameplate. (Main and sub nameplates are attached to the inverter and are located as
shown on the following page.)
(a) Main nameplate
TYPE: Type of inverter
Code Series Name
CUB Jaguar CUB
Code Applicable current rating
3A 3 Amps
5A 5 Amps
200v, 1Ph
8A 8 Amps
11A 11 Amps
17A 17 Amps
1A5 1.5 Amps
2A5 2.5 Amps
200v, 3Ph
3A7 3.7 Amps
400v, 3Ph
5A5 5.5 Amps
9A 9 Amps
Note: When "None" and "w/o braking resistor (standard)" are selected in the built-in option and brake in the
above codes, respectively, the type of inverter is written without the last 2 digits as a standard model.
SOURCE: Number of input phases (three-phase: 3PH, single-phase: 1PH), input voltage, input
frequency, input current
OUTPUT: Number of output phases, rated output capacity, rated output voltage, output
frequency range, rated output current, overload capacity
SER. No.: Product number
3 1 1 2 1 5 R 0 0 0 1
If you suspect the product is not working properly or if you have any questions about your product,
contact IMO.
TYPE
SER. No.
(b) Sub nameplate
Figure 1.1 Nameplates
CUB 1A5 - 4 E
Code
E
Code
1
2
4
Serial number of production lot
Production month
1 to 9: January to September
X, Y, or Z: October, November, or December
Production year: Last digit of year
1-1
CUB8A-2
311215R0001
With integrated filter
Yes
No
Power supply
Single-phase 200v
Three-phase 200v
Three-phase 400v