External View And Terminal Blocks; Transportation - IMO Jaguar CUB Instruction Manual

1.2 External View and Terminal Blocks

(1) External views
Keypad
Control circuit
terminal bock cover
Figure 1.2 External Views of Jaguar CUB
(2) View of terminals
L1/R, L2/S, L3/T, P1, P (+), N (-)
wire port
Heat
sink
(a) CUB5A-2
(* When connecting the RS485 communications cable, remove the control circuit
terminal block cover and cut off the barrier provided in it using snippers.)
Note: A box ( ) in the above model names replaces E suffix for filtered versions.
Figure 1.3 Bottom View of Jaguar CUB

1.3 Transportation

• When carrying the inverter, always support its bottom at the front and rear sides with both hands.
Do not hold covers or individual parts only. You may drop the inverter or break it.
• Avoid applying excessively strong force to the terminal block covers as they are made of plastic
and are easily broken.
Main circuit
Main
terminal block
nameplate
cover
Barrier for the RS485
communications port*
Control signal cable port
DB, P1, P (+) and N (-) wire port
L1/R, L2/S, L3/T, U, V, W,
grounding wire port
DB, U, V, W,
grounding wire port
Cooling
fan
1-2
Control circuit
terminal block
cover
Sub
nameplate
Main
nameplate
(b) CUB8A-2