2.3.5 Wiring for Main Circuit Terminals and Grounding Terminals
Follow the procedure below. Figure 2.3 illustrates the wiring procedure with peripheral equipment.
Wiring procedure
Grounding terminals
G
Inverter output terminals (U, V, and W)
DC reactor connection terminals (P1 and P(+)) *
Braking resistor connection terminals (P(+) and DB) *
DC link circuit terminals (P(+) and N(-)) *
Main circuit power input terminals (L1/R, L2/S and L3/T) or (L1/L and L2/N)
Figure 2.3 Wiring Procedure for Peripheral Equipment
*Perform wiring as necessary.
(This figure is a virtual representation.)
2-7