IMO Jaguar CUB Instruction Manual page 87

F02
Running/Stopping and Rotational Direction
Selects a source issuing a run command--keypad or external control signal input.
- If F02 = 0, 2, or 3, the inverter can run the motor by the
built-in keypad. The motor rotational direction can be specified in two ways, ei-
ther by control signal input (F02 = 0) or by use of prefixed forward or reverse
rotation (F02 = 2 or 3).
When F02 = 0, to specify the motor rotational direction by control signal input,
assign the commands (FWD) and (REV) to terminals [FWD] and [REV], respec-
tively. Turn on the (FWD) or (REV) for the forward or reverse direction, respec-
tively, and then press the
- If F02 = 1, the inverter can run the motor by control terminal inputs. To specify the
motor rotational direction, assign the commands (FWD) and (REV) to terminals
[FWD] and [REV], respectively. Turn on the (FWD) or (REV) for the forward or
reverse direction, respectively. If both of (FWD) and (REV) are turned on si-
multaneously, the inverter immediately decelerates to stop the motor.
The table below lists the operational relationship between function code F02
(Running/Stopping and Rotational Direction), the
signal inputs to terminals [FWD] and [REV], which determines the rotational direc-
tion.
Function Key on the
code F02: keypad
key
0
key
1 Ignored.
key
2
key
key
3
key
key to run the motor.
key operation, and control
Control signal inputs to
terminals [FWD] and [REV]
Function code E98 Function code E99
(FWD) command (REV) command
OFF OFF
ON OFF
OFF ON
ON ON
OFF OFF
ON OFF
OFF ON
ON ON
OFF OFF
ON OFF
OFF ON
ON ON
Ignored.
Ignored.
5-14
and keys on the
Motor
rotational
direction
Stop
Forward
Reverse
Stop
Stop
Stop
Forward
Reverse
Stop
Forward
Stop
Reverse
Stop