Compliance With The Harmonic Component Regulation - IMO Jaguar CUB Instruction Manual

10.4.2 Compliance with the harmonic component regulation

Table 10.1 Compliance with Harmonic Component Regulation
Power supply
Inverter type
voltage
CUB3A-2
Three-phase
200 V
CUB5A-2
CUB1A5-4
Three-phase
400 V
CUB2A5-4
CUB3A-1
Single-phase
200 V
CUB5A-1
* Inverter types marked with in the table above are compliant with the EN61000-3-2 (+A14), so
they may be connected to public low-voltage power supply unconditionally.
Conditions apply when connecting models marked with "—". If you want to connect them to public
low-voltage power supply, you need to obtain permission from the local electric power supplier. In
general, you will need to provide the supplier with the harmonics current data of the inverter. To
obtain the data, contact IMO.
Note 1) Boxes ( ) in the table above replace E suffix for Filtered version
2) When supplying three-phase 200 VAC power stepped down from a three-phase 400 VAC power
line using a transformer, the level of harmonic flow from the 400 VAC line will be regulated.
10.5 Compliance with the Low Voltage Directive in the EU
10.5.1 General
General-purpose inverters are regulated by the Low Voltage Directive in the EU. The Manufacturer
has obtained the proper certification for the Low Voltage Directive from the official inspection
agency. IMO states that all our inverters with CE and/or TÜV marking are compliant with the Low
Voltage Directive.
10.5.2 Points for Consideration when using the Jaguar CUB series in a system to be
certified by the Low Voltage Directive in the EU
If you want to use the Jaguar CUB series of inverters in systems/equipment/appliances in the EU,
refer to the guidelines on page vi.
w/o DC reactor w/ DC reactor
* *
* *
—
—
—
— —
10-5