IMO Jaguar CUB Instruction Manual page 66

Table 3.13 Maintenance Display Items
LED Monitor
Display contents
shows:
5_00
Accumulated Shows the accumulated power-ON time of the inverter.
run time
Unit: thousands of hours.
When the total ON-time is less than 10,000 hours (display: 0.001 to
9.999), it is possible to check data in hourly units. When the total time
is 10,000 hours or more (display: 10.00 to 65.53), the display will
change to units of 10 hours. When the total time exceeds 65,535
hours, the display will be reset to 0 and the count will start again.
5_01
DC link circuit Shows the DC link circuit voltage of the inverter.
voltage
Unit: V (volts)
5_03
Max. temperature Shows the maximum temperature of the heat sink for every hour.
of heat sink
Unit: ºC
5_04
Max. effective Shows the maximum effective current for every hour.
current
Unit: A (amperes)
5_05
Capacitance of Shows the current capacitance of the DC bus capacitor, based on the
the DC bus capacitance when shipping as 100%. Refer to Chapter 7 "MAINTE-
capacitor NANCE AND INSPECTION" for details.
Unit: %
5_06
Accumulated Shows the accumulated run time of the capacitor mounted on the
run time of
printed circuit board.
electrolytic
The display method is the same as for "accumulated run time" above.
capacitor on the
However, when the total time exceeds 65,535 hours, the count stops
printed circuit
and the display remains at 65.53.
board
5_07
Accumulated Shows the accumulated run time of the cooling fan.
run time of the
The cooling fan ON/OFF control (function code H06) is effective, so
cooling fan
the time when the fan is stopped is not counted.
The display method is the same as for "accumulated run time" above.
However, when the total time exceeds 65,535 hours, the count stops
and the display remains at 65.53.
5_08
Number of The motor run times (the number of times the inverter run command is
startups set to on) are calculated and displayed.
1.000 indicates 1,000 times. When any number ranging from 0.001 to
9.999 is displayed, the display increases by 0.001 per startup, and
when any number from 10.00 to 65.53 is displayed, the display in-
creases by 0.01 every 10 startups. When the total number exceeds
65,535, the display will be reset to 0 and the count will start again.
5_11
No. of RS485 Shows the total number of times RS485 communications error has
errors occurred after the power is turned on.
Once the number of errors exceeds 9.999, the display (count) returns
to 0.
5_12
RS485 error Shows the latest error that has occurred with RS485 communications
contents in hexadecimal format.
5_14
ROM version of Shows the ROM version of the inverter as a 4-digit display.
inverter
5_16
ROM version of Shows the ROM version of the keypad panel as a 4-digit display. (For
keypad panel remote keypad only.)
Description
3-24