Steering Stem - KYMCO NEXXON 50 Service Manual

11
. FRONT WHEEL/SUSPENSION/
STEERING
INSTALLATION
Install the front shock absorbers onto the

steering stem.

Tighten the lower mount bolts.
Install the front fender.
Install the front wheel.
STEERING STEM
REMOVAL
Remove the steering handlebar.
Disconnect the speedometer cable and front
brake fluid pipe and remove the front brake
caliper.
Remove the front wheel.
Hold the steering stem top cone race and
remove the steering stem lock nut.
Special
Lock nut socket wrench
Remove the top cone race and remove the
steering stem.
＊
Be careful not to lose the steel balls (26
on top race and 19 on bottom race).
Inspect the ball races, cone races and steel
balls for wear or damage.
Replace if necessary.
Lock Nut Socket Wrench
Lock Nut Wrench
Top Cone Race
NEXXON 50
Bolts
11-16