■ Setting QUALITY
Sets the acceleration used in cutting.
1
Step
Press the
(COND.) key in READY mode to display the cutter-pen conditions.
2
Step
Select the setting area (condition number) to be set, and then use the
to the position shown below.
2 0 9 U + 1 2 3 3 0
3
Step
Press the
or
key to select the value to be changed in the range specified below
CE5000-60:
"1", "2", "3"
CE5000-120: "1", "2", "*"
Press the
(ENTER) key to confirm the selection. If other conditions are to be set, press the
key to move the
symbol to the parameter to be set.
CHECKPOINT
• If SPEED is set to "*" for the CE5000-120, QUALITY is also set to "*" and accel-
3.4
Displaying the Effective Cutting Area
Press the
(ENTER) key in READY mode to display the current effective cutting area.
X 0 0 0 0 m m Y 0 0 0 m m
3.5
Moving the Pen
In READY mode, press the
key to feed the medium backward or forward. Pressing the
the
(POSITION) keys enables high-speed or low-speed movement.
(POSITION) keys +
(POSITION) keys +
2
eration is calculated automatically.
or
key to move the pen carriage to the left or right, and the
(NEXT) key: High-speed movement
(PREV.) key: Low-speed movement
(NEXT), or
3 – 9
or
key to move the
(PREV.) key together with
symbol
or
or