Appendix A Main Specifications; Appendix A Main Specifications - GRAPHTEC CE5000-60 User Manual

Appendix A Main Specifications
Item
CPU
Configuration
Drive system
Maximum cutting area
Range of guaranteed precision
Compatible media widths
Maximum media thickness
Maximum cutting speed
Specifiable cutting speeds
Cutting force
Minimum character size
Mechanical resolution
Programmable resolution
Repeatability precision
No. of pens mountable
Compatible cutter type
Compatible pen type
Compatible cutting film
Interfaces
Buffer capacity
Command modes
Display panel
Rated power supply
Power consumption
Operating environment
Conditions for guaranteed
precision
External dimensions
*3
(W x D x H)
*3
Weight
*1: Varies depending on the type of Graphtec-authorized film and the cutting conditions
TM
*2: HP-GL is a registered trademark of Hewlett-Packard Company.
*3: Including the stand
CE5000-60
32-bit CPU
Grit rolling
Digital servo
603 mm x 50 m
*1
584 mm x 5 m
Minimum: 50 mm
Maximum: 712 mm
(28 inches)
0.25 mm
60 cm/s (in all directions)
1–10, 15, 20, 25, 30, 35, 40, 45,
50, 55, 60 cm/s
0.2–2.9N (20 gf to 300 gf)
(31 levels)
Approximately 5 mm for alphanumeric characters
(varies depending on the medium, font, etc.)
0.005 mm
GP-GL: 0.1/0.05/0.025/0.01 mm; HP-GL
*1
0.1 mm or less per 2 m
1 pen
Supersteel cutter blades
Water-based fiber-tip pens
Marking film (PVC, fluorescent, or reflective film) up to 0.25 mm in
thickness (excluding high-luminosity reflective film)
RS-232C/USB 2.0 (Full Speed)
2 MB
TM *2
GP-GL, HP-GL (selected on the control panel)
Liquid crystal display (16 characters x 1 row)
100 to 240 V AC, 50/60 Hz
100 VA
10°C to 35°C, 35% to 75% RH
16°C to 32°C, 35% to 70% RH
Approx.
851 x 585 x 1004 mm
Approx. 25 kg
A – 2
CE5000-120
1213 mm x 50 m
*1
1194 mm x 5 m
Minimum: 85 mm
Maximum: 1346 mm
(52 inches)
100 cm/s (45° direction)
1–10, 15, 20, 25, 30, 35, 40, 45,
50, 55, 60, * cm/s
0.2–4.4N (20 gf to 450 gf)
(38 levels)
TM *2
: 0.025 mm
Approx.
1,487 x 744 x 1194 mm
Approx. 40 kg