GRAPHTEC CE5000-60 User Manual page 85

3
Step
Press the (ENTER) key to display the wear-rate setting submenu, and then press the
(PREV.) key until the following menu is displayed.
C L E A R G R O U P
4
Step
Press the (ENTER) key to display the wear-rate clear menu.
C L E A R G R O U P 1 < Y E S >
5
Step
The number to the right of "CLEAR GROUP" is the group number. Use the
decrease the group number, and press the
group number to be cleared, and press the
selection(s), press the
6
Step
Press the (PAUSE) key to cancel PAUSE mode.
or
(NEXT) or (PREV.) key.
key to select "YES" or "NO." Select "YES" for the
(ENTER) key to clear the total distance. To cancel the
4 – 41
(NEXT) or
or key to increase or