Vrrp Configuration Examples; Single-Vrrp Group Configuration - H3C S5600 Series Operation Manual

To do...
Display VRRP state information
Clear VRRP statistics information

VRRP Configuration Examples

Single-VRRP Group Configuration

Network requirements
Host A uses the VRRP virtual router comprising switch A and switch B as its default gateway to visit host
B on the Internet.
The information about the VRRP group is as follows:
VRRP group ID: 1
Virtual router IP address: 202.38.160.111/24
Master: Switch A
Backup: Switch B
Preemptive mode: enabled
Table 1-1 Network description
Switch
connecting to Host A
LSW-A GigabitEthernet 1/0/6
LSW-B GigabitEthernet 1/0/5
display vrrp [ verbose ] [ interface
vlan-interface vlan-id [ vrid virtual-router-id ] ]
reset vrrp statistics [ interface vlan-interface
vlan-id [ vrid virtual-router-id ] ]
Ethernet port
202.38.160.1/24
202.38.160.2/24
Use the command...
IP address of the
VLAN interface
110
100 (default)
1-10
Available in user view
Switch priority in
Preemptive mode
the VRRP group
Enabled
Enabled
Remarks