Comparison Of Ssh Commands With The Same Functions - H3C S5600 Series Operation Manual

To do...
Display information about locally
saved public keys of SSH peers
Display information about SSH
status and about sessions of active
connections with SSH clients
Display information about all SSH
users
Display the current source IP
address or the IP address of the
source interface specified for the
SSH server.
Display the mappings between
host public keys and SSH servers
saved on a client
Display the current source IP
address or the IP address of the
source interface specified for the
SSH Client.

Comparison of SSH Commands with the Same Functions

After the SSH protocol supports the DSA asymmetric key algorithm, some SSH configuration
commands are changed. For the sake of SSH configuration compatibility, the original commands are
still supported.
Table 1-2 List of SSH configuration commands with the same functions
Operation
Display local RSA public keys
Display information about the
peer RSA public keys
Generate RSA key pairs
Destroy RSA key pairs
Enter public key view
Import RSA public key from
public key file
Specify publickey
authentication as the default
authentication type for all SSH
clients
Specify on the client the host
public key of the server to be
connected
Assign a public key to an SSH
user
display public-key peer [ brief | name
pubkey-name ]
display ssh server { session | status }
display ssh user-information [ username ]
display ssh-server source-ip
display ssh server-info
display ssh2 source-ip
Table 1-2 lists both the original commands and current commands.
display rsa local-key-pair public
display rsa peer-public-key [ brief |
name keyname ]
rsa local-key-pair create
rsa local-key-pair destroy
rsa peer-public-key keyname
rsa peer-public-key keyname
import sshkey filename
ssh authentication-type default rsa
ssh client { server-ip | server-name }
assign rsa-key keyname
ssh user username assign rsa-key
keyname
Use the command...
Original commands
1-24
Remarks
Current commands
display public-key local rsa
public
display public-key peer [ brief |
name pubkey-name ]
public-key local create rsa
public-key local destroy rsa
public-key peer keyname
public-key peer keyname import
sshkey filename
ssh authentication-type default
publickey
ssh client { server-ip |
server-name } assign publickey
keyname
ssh user username assign
publickey keyname