Boot Menu - H3C S5600 Series Operation Manual

The loading process of the Boot ROM software is the same as that of the host software, except that
during the former process, you should press "6" or <Ctrl+U> and <Enter> after entering the BOOT
menu and the system gives different prompts. The following text mainly describes the Boot ROM
loading process.

BOOT Menu

Starting......
***********************************************************
*
*
*
***********************************************************
Copyright (c) 2004-2007 Hangzhou H3C Technologies Co., Ltd.
Creation date
CPU Clock Speed : 400MHz
BUS Clock Speed : 33MHz
Memory Size
Mac Address
Press Ctrl-B to enter Boot Menu...
Press <Ctrl+B>. The system displays:
Password :
To enter the BOOT menu, you should press <Ctrl+B> within five seconds (full startup mode) or one
second (fast startup mode) after the information "Press Ctrl-B to enter BOOT Menu..." displays.
Otherwise, the system starts to extract the program; and if you want to enter the BOOT Menu at this
time, you will have to restart the switch.
Enter the correct Boot ROM password (no password is set by default). The system enters the BOOT
Menu:
1. Download application file to flash
2. Select application file to boot
H3C S5600-50C BOOTROM, Version 506
: May 30 2007, 09:57:40
: 128MB
: 000fe2123456
BOOT MENU
1-2
*
*
*