H3C S5600 Series Operation Manual page 1089

To do...
Configure statistics
interval and the
maximum number of
retained statistics
information
Configure the retaining
time of statistics
information
Configure test start time
and lifetime
Enable routing table
bypass
Configure the TTL
Configure the automatic
test interval
Configure the probe
timeout time
Configure the service
type
Start the test
Display test results
9) Configuring DNS test on HWPing client
Follow these steps to configure DNS test on HWPing client:
To do...
Enter system view
Enable the HWPing client function
Create an HWPing test group and
enter its view
Configure the test type
Configure the source IP address
Use the command...
statistics { interval
interval | max-group
number }
statistics keep-time
keep-time
test-time begin
{ hh:mm :ss [ yyyy/mm/dd ]
| now } lifetime lifetime
sendpacket passroute
ttl number
frequency interval
timeout time
tos value
test-enable
display hwping results
[ admin-name
operation-tag ]
Use the command...
system-view
hwping-agent enable
hwping administrator-name
operation- tag
test-type dns
source-ip ip-address
1-18
Remarks
Optional
By default, statistics interval is 120 minutes and up to
two pieces of statistics information can be retained.
Optional
By default, the retaining time of statistics information
is 120 minutes.
Optional
By default, no test start time and lifetime is configured.
Optional
By default, routing table bypass is disabled.
Optional
By default, TTL is 20.
The sendpacket passroute command voids the ttl
command.
Optional
By default, the automatic test interval is zero seconds,
indicating no automatic test will be made.
Optional
By default, a probe times out in three seconds.
Optional
By default, the service type is zero.
Required
Required
The display command can be executed in any view.
—
Required
By default, the HWPing client
function is disabled.
Required
By default, no test group is
configured.
Required
By default, the test type is ICMP.
Optional
By default, no source IP address is
specified.
Remarks