Hwping Client Configuration - H3C S5600 Series Operation Manual

Hide thumbs Also See for S5600 Series:
Table of Contents

Advertisement

To do...
Configure a TCP listening
service
Note that:
The HWPing server function is needed only for jitter, TCP, and UDP tests.
You can configure multiple TCP/UDP listening services on one HWPing server, with each listening
service corresponding to a specific destination IP address and port number.

HWPing Client Configuration

HWPing client configuration
After HWPing client is enabled, you can create multiple test groups for different tests, without the need
to enable HWPing client repeatedly for each test group.
Different types of HWPing tests are somewhat different in parameters and parameter ranges. The
following text describes the configuration on HWPing client for different test types.
Among the test types supported by HWPing, only the ICMP test can be performed when IRF fabric is
enabled; all other test types cannot be performed when IRF fabric is enabled. With IRF fabric enabled,
you are allowed to configure HWPing tests and use the display commands to check your
configurations, but for non ICMP tests, the HWPing tests you configured cannot be executed until fabric
is disabled.
1)
Configuring ICMP test on HWPing client
Follow these steps to configure ICMP test on HWPing client:
To do...
Enter system view
Enable the HWPing client function
Create an HWPing test group and
enter its view
Configure the test type
Configure the destination IP
address
Configure the source IP address
Use the command...
hwping-server tcpconnect
ip-address port-num
Use the command...
system-view
hwping-agent enable
hwping administrator-name
operation-tag
test-type icmp
destination-ip ip-address
source-ip ip-address
1-5
Remarks
Required for TCP tests
By default, no TCP listening service is
configured.
Remarks
Required
By default, the HWPing client
function is disabled.
Required
By default, no test group is
configured.
Optional
By default, the test type is ICMP.
Required
By default, no destination address
is configured.
Optional
By default, no source IP address is
configured.

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

S5600-26cS5600-26c-pwrS5600-26fS5600-50cS5600-50c-pwr

Table of Contents