Configuring simulated joining in interface view
Follow these steps to configure simulated joining in interface view:
To do...
Enter system view
Enter interface view
Configure one or more ports in the
VLAN as simulated member
host(s) of the specified multicast
group
Configuring simulated joining in Ethernet port view
Follow these steps to configure simulated joining in Ethernet port view:
Enter system view
Enter Ethernet port view
Configure the port in the specified VLAN as a
simulated member host of the specified
multicast group
Before configuring simulated joining, you must enable IGMP in interface view first.
If you configure simulated joining in Ethernet port view, the Ethernet port must belong to the
specified VLAN; otherwise the configuration does not take effect.
Configuring IGMP Proxy
Follow these steps to configure IGMP proxy:
To do...
Enter system view
Enter VLAN interface view
Configure IGMP proxy
system-view
interface interface-type interface-number
VLAN interface
view
LoopBack interface
view
To do...
system-view
interface Vlan-interface interface-number
igmp proxy Vlan-interface
interface-number
Use the command...
igmp host-join
group-address port
interface-list
igmp host-join
group-address
Use the command...
system-view
interface interface-type
interface-number
igmp host-join group-address vlan
vlan-id
Use the command...
3-11
Remarks
—
—
Required
Disabled by
default
Remarks
—
—
Required
Disabled by default
Remarks
—
—
Required
Disabled by default