H3C S5600 Series Operation Manual page 1081

To do...
Configure a file name for
the FTP operation
Configure size of a file to
be uploaded in an FTP
test
Start the test
Display test results
4) Configuring HTTP test on HWPing client
Follow these steps to configure HTTP test on HWPing client:
To do...
Enter system view
Enable the HWPing client function
Create an HWPing test group and
enter its view
Configure the test type
Configure the destination IP
address
Configure dns-server
Configure the source IP address
Configure the source port
Configure the number of probes
per test
Configure a test description
Use the command...
filename file-name
filesize file-size
test-enable
display hwping results
[ admin-name operation-tag ]
Use the command...
system-view
hwping-agent enable
hwping administrator-name
operation-tag
test-type http
destination-ip ip-address
dns-server ip-address
source-ip ip-address
source-port port-number
count times
description string
1-10
Remarks
Required
By default, no file name is configured for the
FTP operation
Required
By default, the file is 1 MB.
Required
Required
You can execute the command in any view.
Remarks
—
Required
By default, the HWPing client function
is disabled.
Required
By default, no test group is
configured.
Required
By default, the test type is ICMP.
Required
You can configure an IP address or a
host name.
By default, no destination address is
configured.
Required when you use the
destination-ip command to configure
the destination address as the host
name.
By default, no IP address of the DNS
server is configured.
Optional
By default, no source IP address is
configured.
Optional
By default, no source port is
configured.
Optional
By default, each test makes one
probe.
Optional
By default, no description information
is configured.