File Backup And Restoration - H3C S5600 Series Operation Manual

The configurations of different units in the fabric system can be saved in different .cfg configuration files
on the TFTP server. These configuration files form the startup configuration of the whole fabric.

File Backup and Restoration

Configuration prerequisites
Before performing the following operations, you must first ensure that:
The relevant units support TFTP client.
The TFTP server is started
A route exists between the TFTP server and TFTP client.
Configuration procedure
Follow these steps to back up and restore configuration file:
To do...
Back up the current configuration
of a specified unit
Back up the current configuration
of the whole fabric system
Restore the startup configuration of
a specified unit
Restore the startup configuration of
the whole fabric system
Use the command...
backup unit unit-id
current-configuration to
{ dest-addr | dest-hostname }
filename.cfg
backup fabric
current-configuration to
{ dest-addr | dest-hostname }
filename.cfg
restore unit unit-id
startup-configuration from
{ source-addr | source-hostname }
filename.cfg
restore fabric
startup-configuration from
{ source-addr | source-hostname }
filename.cfg
1-8
Remarks
Optional
Available in user view
Optional
Available in user view
Optional
Available in user view
Optional
Available in user view