Enabling The Poe Feature On A Port - H3C S5600 Series Operation Manual

Setting the PoE Mode on a Port
Configuring the PD Compatibility Detection Function
Configuring PoE Over-Temperature Protection on the Switch
Upgrading the PSE Processing Software Online
Upgrading the PSE Processing Software Online
The online upgrading of PSE processing software can update the processing software or
repair the software if it is damaged. Before performing the following configuration, download
the PSE processing software to the Flash of the switch.
Follow these steps to upgrade PSE processing software online:
Enter system view
Upgrade the PSE
processing software online
In the case that the PSE processing software is damaged (that is, no PoE
command can be executed successfully), use the full update mode to upgrade
and thus restore the software.
The refresh update mode is to upgrade the original processing software in the
PSE through refreshing the software, while the full update mode is to delete the
original processing software in PSE completely and then reload the software.
Generally, the refresh update mode is used to upgrade the PSE processing
software.
When the online upgrading procedure is interrupted for some unexpected
reason (for example, the device restarts due to some errors), if the upgrade in
full mode fails after restart, you must upgrade in full mode after power-off and
restart of the device, and then restart the device manually. In this way, the
former PoE configuration is restored.
Upgrading the PSE Processing Software of Fabric Switches Online
Displaying PoE Configuration

Enabling the PoE Feature on a Port

Follow these steps to enable the PoE feature on a port:
To do...
Enter system view
Enter Ethernet port view
Enable the PoE feature on a port
Task
To do...
system-view
poe update { refresh | full }
filename
Use the command...
system-view
interface interface-type
interface-number
poe enable
Use the command...
1-3
Remarks
Optional
Optional
Optional
Optional
Remarks
—
Required
The specified PSE processing software is
a file with the extension .s19.
Optional
Optional
Remarks
—
—
Required