Enhanced Cluster Feature Configuration Example - H3C S5600 Series Operation Manual

[Sysname-cluster] ip-pool 192.168.5.1 255.255.255.224
# Name and build the cluster.
[Sysname-cluster] build aaa
[aaa_0.Sysname-cluster]
# Configure VLAN-interface 2 as the network management interface.
[aaa_0.Sysname] cluster
[aaa_0.Sysname-cluster] nm-interface Vlan-interface 2

Enhanced Cluster Feature Configuration Example

Network requirements
The cluster operates properly.
Add the device with the MAC address 0001-2034-a0e5 to the cluster blacklist, that is, prevent the
device from being managed and maintained by the cluster.
Save the current cluster topology as the base topology and save it in the flash of the local
management device in the cluster.
Network diagram
Figure 1-6 Network diagram for the enhanced cluster feature configuration
192. 168.0.4
Configuration procedure
# Enter cluster view.
<aaa_0.Sysname> system-view
[aaa_0.Sysname] cluster
# Add the MAC address 0001-2034-a0e5 to the cluster blacklist.
[aaa_0.Sysname-cluster] black-list add-mac 0001-2034-a0e5
# Backup the current topology.
[aaa_0.Sysname-cluster] topology accept all save-to local-flash
1
Management
device
Member
Member
device
device
2
FTP server
192. 168.0.1
4
Member
device
3
0001- 2034-a0e5
1-28