H3C S5600 Series Operation Manual page 1088

8) Configuring UDP test on HWPing client
Follow these steps to configure UDP test on HWPing client:
To do...
Enter system view
Enable the HWPing
client function
Create an HWPing test
group and enter its view
Configure the test type
Configure the
destination address
Configure the
destination port
Configure the source IP
address
Configure the source
port
Configure the number of
probes per test
Configure the maximum
number of history
records that can be
saved
Configure the data
packet size
Configure a stuffing
character string
Configure a test
description
Enable history record
Configure the retaining
time of history record
Use the command...
system-view
hwping-agent enable
hwping
administrator-name
operation- tag
test-type { udpprivate |
udppublic }
destination-ip ip-address
destination-port
port-number
source-ip ip-address
source-port port-number
count times
history-records number
datasize size
datafill string
description string
history-record enable
history keep-time
keep-time
1-17
Remarks
—
Required
By default, the HWPing client function is disabled.
Required
By default, no test group is configured.
Required
By default, the test type is ICMP.
Required
This IP address and the one configured on the
HWPing server for listening service must be the same.
By default, no destination address is configured.
Required in a Udpprivate test
A Udppublic test is a UDP connection test on port
7. Use the hwping-server udpecho ip-address 7
command on the server to configure the listening
service port; otherwise the test will fail. No port
number needs to be configured on the client; any
destination port number configured on the client
will not take effect.
By default, no destination port number is
configured.
Optional
By default, no source IP address is configured.
Optional
By default, no source port is specified.
Optional
By default, one probe is made per test.
Optional
By default, the maximum number is 50.
Optional
By default, the data packet size is 100 bytes.
Optional
By default, the numbers between 0 and 255 are
stuffed into datagrams in a cyclically way.
Optional
By default, no description information is configured.
Optional
By default, history record is not enabled.
Optional
By default, the retaining time of history record is 120
minutes.