Establishment Of An Irf Fabric - H3C S5600 Series Operation Manual

Figure 1-1 IRF networking
Master

Establishment of an IRF Fabric

Topology and connections of an IRF fabric
An IRF fabric typically has a ring topology structure. As shown in
two special ports on the rear panel to connect with two other switches in the fabric. The two ports are
called fabric ports in general, UP port and DOWN port respectively; the other ports of the switch, which
are available for connections with users or devices outside the fabric, are called user ports.
Figure 1-2 A schematic diagram of an IRF fabric
A correctly built IRF fabric features the following:
Multiple S5600 series switches are interconnected through their fabric ports.
Given a switch, its UP port is connected to the DOWN port of another switch, and its DOWN port is
connected to the UP port of a third one.
Port connection mode for S5600 series ring topology IRF fabric is shown in
IP network
Slave
IRF cable
Equals
1-2
IP network
IRF
Figure 1-2, each S5600 switch uses
Figure 1-3.