Configuring The Hop Limit Of Icmpv6 Reply Packets; Configuring Ipv6 Dns - H3C S5600 Series Operation Manual

To do...
Configure the maximum number of
IPv6 ICMP error packets sent
within a specified time

Configuring the Hop Limit of ICMPv6 Reply Packets

When sending an ICMPv6 reply packet, the device will fill a configurable value in the Hop Limit field in
the ICMPv6 reply packet header.
Follow these steps to configure the hop limit of ICMPv6 reply packets:
To do...
Enter system view
Configure the hop limit of ICMPv6
reply packets

Configuring IPv6 DNS

Configuring a static IPv6 DNS entry
You can directly use a host name when applying telnet applications and the system will resolve the host
name into an IPv6 address. Each host name can correspond to only one IPv6 address. A newly
configured IPv6 address will overwrite the previous one.
Follow these steps to configure a static IPv6 DNS entry:
To do...
Enter system view
Configure a static IPv6 DNS entry
Configuring dynamic DNS resolution
If you want to use the dynamic domain name function, you can use the following command to enable
the dynamic domain name resolution function. In addition, you should configure a DNS server so that a
query request message can be sent to the correct server for resolution. The system can support at most
six DNS servers.
You can configure a domain name suffix so that you only need to enter some fields of a domain name
and the system automatically adds the preset suffix for address resolution. The system can support at
most 10 domain name suffixes.
Follow these steps to configure dynamic DNS resolution:
To do...
Enter system view
Use the command...
ipv6 icmp-error { bucket
bucket-size | ratelimit interval }*
Use the command...
system-view
ipv6 nd hop-limit value
Use the command...
system-view
ipv6 host hostname ipv6-address
Use the command...
system-view
1-14
Remarks
Optional
By default, the capacity of a token
bucket is 10 and the update period
to 100 milliseconds. That is, at
most 10 IPv6 ICMP error packets
can be sent within an update
period.
Remarks
—
Optional
64 by default.
Remarks
—
Required
Remarks
—