H3C S5600 Series Operation Manual page 551

Creating an ISP Domain and Configuring Its Attributes
Follow these steps to create an ISP domain and configure its attributes:
To do...
Enter system view
Configure the form of the delimiter
between the username and the ISP
domain name
Create an ISP domain or set an
ISP domain as the default ISP
domain
Set the status of the ISP domain
Set the maximum number of
access users that the ISP domain
can accommodate
Set the idle-cut function
Set the accounting-optional switch
Set the messenger function
Set the self-service server location
function
Note that:
On an S5600 series switch, each access user belongs to an ISP domain. You can configure up to
16 ISP domains on the switch. When a user logs in, if no ISP domain name is carried in the user
name, the switch assumes that the user belongs to the default ISP domain.
If you have configured to use "." as the delimiter, for a user name that contains multiple ".", the first
"." will be used as the domain delimiter.
If you have configured to use "@" as the delimiter, the "@" must not appear more than once in the
user name.
If the system does not find any available accounting server or fails to communicate with any
accounting server when it performs accounting for a user, it does not disconnect the user as long
Use the command...
system-view
domain delimiter { at | dot }
domain { isp-name | default
{ disable | enable isp-name } }
state { active | block }
access-limit { disable | enable
max-user-number }
idle-cut { disable | enable minute
flow }
accounting optional
messenger time { enable limit
interval | disable }
self-service-url { disable | enable
url-string }
2-2
Remarks
—
Optional
By default, the delimiter between
the username and the ISP domain
name is "@".
Required
If no ISP domain is set as the
default ISP domain, the ISP
domain "system" is used as the
default ISP domain.
Optional
By default, an ISP domain is in the
active state, that is, all the users in
the domain are allowed to request
network service.
Optional
By default, there is no limit on the
number of access users that the
ISP domain can accommodate.
Optional
By default, the idle-cut function is
disabled.
Optional
By default, the accounting-optional
switch is off.
Optional
By default, the messenger function
is disabled.
Optional
By default, the self-service server
location function is disabled.