Creating A Dhcp Global Address Pool; Configuring An Address Allocation Mode For The Global Address Pool - H3C S5600 Series Operation Manual

Follow these steps to configure the global address pool mode on interface(s):
Enter system view
Configure the
specified
interface(s) or all
the interfaces to
operate in global
address pool
mode

Creating a DHCP Global Address Pool

Follow these steps to create a DHCP address pool:
To do...
Enter system view
Create a DHCP global address
pool and enter its view

Configuring an Address Allocation Mode for the Global Address Pool

You can configure either the static IP address allocation mode or the dynamic IP address allocation
mode for a global address pool, and only one mode can be configured for one DHCP global address
pool.
For dynamic IP address allocation, you need to specify the range of the IP addresses to be dynamically
assigned. But for static IP address binding, you can regard that the IP address statically bound to a
DHCP client comes from a special DHCP address pool that contains only one IP address.
Configuring the static IP address allocation mode
Some DHCP clients, such as WWW servers, need fixed IP addresses. This can be achieved by binding
IP addresses to the MAC addresses of these DHCP clients. When such a DHCP client requests an IP
address, the DHCP server searches for the IP address corresponding to the MAC address of the DHCP
client and assigns the IP address to the DHCP client.
When some DHCP clients send DHCP-DISCOVER packets to the DHCP server to apply for IP
addresses, they construct client IDs and add them in the DHCP-DISCOVER packets. If the bindings of
client IDs and IP addresses are configured on the DHCP server, when such a client requests an IP
To do...
Configure the current
interface
Configure multiple
interfaces
simultaneously in
system view
system-view
dhcp server ip-pool pool-name
Use the command...
system-view
interface interface-type
interface-number
dhcp select global
quit
dhcp select global { interface
interface-type interface-number [ to
interface-type interface-number ] | all }
Use the command...
2-6
Remarks
—
Optional
By default, the
interface operates in
global address pool
mode.
Remarks
—
Required
Not created by default.