GETTING TO KNOW GXE5102/5104/5108/5116
USING THE LCD MENU
NAVIGATION IN LCD MENU
•
Default LCD display. By default, when the device is powered on, the LCD will show device model,
hardware version and IP address.
•
Enter Menu. Press "Down" or "OK" button to start browsing menu options.
•
Navigate in the menu options. Press the "Down" arrow key to browser different menu options.
•
Select menu entries. Press the "OK" button to select an entry.
•
Exit. There is "Back" option in the menu. Select it to go back to previous menu.
•
The LCD will come back to default display after being idle in menu for more than 20 seconds.
LCD MENU OPTIONS
The following table shows the LCD menu options.
View Events
Device Info
Network Info
Network Menu
Factory Menu
Firmware version 1.0.0.19
Table 4: GXE5102/5104/5108/5116 LCD MENU OPTIONS
•
Critical Events
•
Other Events
•
Hardware: Hardware version number
•
Software: Software version number
•
P/N: Part number
•
MAC: MAC address
•
Uptime: System up time
•
Mode: DHCP, Static IP, or PPPoE
•
IP: IP address
•
Subnet Mask
•
LAN Mode
Select LAN mode as DHCP, Static IP or PPPoE
•
LCD Test Patterns
GXE5102/5104/5108/5116 USER MANUAL
Page 13 of 52