Table 3: Lcd Menu Options - Grandstream Networks UCM6100 Series User Manual

•
View Events
•
•
•
•
Device Info
•
•
•
For UCM6104/UCM6108/UCM6116:
•
•
•
For UCM6102:
Network Info
•
•
•
•
•
For UCM6104/UCM6108/UCM6116:
•
•
Network Menu
For UCM6102:
•
•
•
•
•
Factory Menu
•
•

Table 3: LCD Menu Options

Critical Events
Other Events
Hardware: Hardware version number
Software: Software version number
P/N: Part number
WAN MAC: WAN side MAC address (UCM6102 only)
LAN MAC: LAN side MAC address
Uptime: System up time
LAN Mode: DHCP, Static IP, or PPPoE
LAN IP: IP address
LAN Subnet Mask
WAN Mode: DHCP, Static IP, or PPPoE
WAN IP: IP address
WAN Subnet Mask
LAN IP: IP address
LAN Subnet Mask
LAN Mode: Select LAN mode as DHCP, Static IP or PPPoE
Static Route Reset: Click to reset the static route setting
WAN Mode: Select WAN mode as DHCP, Static IP or PPPoE
Static Route Reset: Click to reset the static route setting
Reboot
Factory Reset
LCD Test Patterns
Press "OK" to start. Then press "Down" button to test different LCD patterns.
When done, press "OK" button to exit.
Fan Mode
Select "Auto" or "On".
LED Test Patterns
UCM6100 Series User Manual
Version 1.0.18.13
P a g e | 49