Table 3: Lcd Menu Options - Grandstream Networks UCM6100 Series User Manual

View Events
Device Info
Network Info
Network Menu
Factory Menu
Firmware Version 1.0.10.39

Table 3: LCD Menu Options


Critical Events

Other Events

Hardware: Hardware version number

Software: Software version number

P/N: Part number

WAN MAC: WAN side MAC address (UCM6102 only)

LAN MAC: LAN side MAC address

Uptime: System up time
For UCM6104/UCM6108/UCM6116:

LAN Mode: DHCP, Static IP, or PPPoE

LAN IP: IP address

LAN Subnet Mask
For UCM6102:

WAN Mode: DHCP, Static IP, or PPPoE

WAN IP: IP address

WAN Subnet Mask

LAN IP: IP address

LAN Subnet Mask
For UCM6104/UCM6108/UCM6116:

LAN Mode: Select LAN mode as DHCP, Static IP or PPPoE

Static Route Reset: Click to reset the static route setting
For UCM6102:

WAN Mode: Select WAN mode as DHCP, Static IP or PPPoE

Static Route Reset: Click to reset the static route setting

Reboot

Factory Reset

LCD Test Patterns
Press "OK" to start. Then press "Down" button to test different LCD
patterns. When done, press "OK" button to exit.

Fan Mode
Select "Auto" or "On".

LED Test Patterns
UCM6100 Series IP PBX User Manual Page 40 of 331