Color Calibration - Xerox Phaser 6100 Service Manual

7.6.2.8 Color Calibration

This feature controls the setting of the TRC (Tone Reproduction Curve).
Note
Color Calibration can be found on the control panel's main menu, in normal customer mode, and is not part of
the EDC diagnostic tests.
<How to operate>
a. From the main menu, in customer mode, go to "Color", then "Calibration".
b.
Press the OK button to select this function.
c.
Use the Scroll button to move through the menu items.
Off turns TRC off
Auto is the default setting
Run Now will perform (on the next print) a color measurement and adjust according to the TRC.
d. Press the OK button to select this function.
e. From the main menu, in customer mode, go to "Color", then
f. Press the OK button to select this function.
g. Press OK again to select CMYK.
h. Use the Scroll button to select
Manual Adjust allows for a manual adjustment of each color.
Note
For more details on the TRC process refer to section 5.1.4.4 in section 5 of this manual.
"Default" or "Manual Adjust".
Maintenance and Diagnostics
"Custom Color".
Service Manual 7-19