Jams - Xerox Phaser 6100 Service Manual

Maintenance and Diagnostics

7.1.2 Jams

1) Jam at Tray 1/Tray 2 (Jam in feed area)
After paper pick, paper was not fed any further.
Paper did not reach the feed sensor in time.
Feed sensor is faulty and does not detect paper.
Tray 1 paper pick error: When paper is not picked
from Tray 1.
Tray 2 paper pick error: When paper is not picked
from Tray 2.
2) Jam at C (Jam inside printer)
After the leading edge of the paper has reached the
feed sensor, the feed sensor doesn't turn off (fails
to detect the trailing edge of the paper) in time.
After the leading edge of the paper has
passed the feed sensor, it doesn't reach the exit
sensor in time.
Exit sensor is faulty and does not detect paper.
3) Jam at B, C (Jam in exit area)
After the leading edge of the paper has passed the
exit sensor, the trailing edge of the paper has not
passed the exit sensor in time.
The paper drive motor has been driving for longer
than the time needed for the longest paper size and
the exit sensor has not turned off.
7-2
Feed Sensor
Pick-up
Roller
Paper Empty Sensor
Exit Sensor
Feed Sensor
Exit Sensor