Color Calibration; Adjusting Paper Registration - Xerox VersaLink C7000 User Manual

Maintenance

Color Calibration

Use Color Calibration to adjust colors that appear incorrect, or for composite grays that look neutral.
To perform an Automatic Color Calibration:
1. At the printer control panel, press the Home button.
Log in as administrator. For details, refer to the System Administrator Guide, located at
2.
www.xerox.com/office/VLC7000docs.
Touch Device > Support > Color Calibration - Automatic.
3.
To begin the color calibration, touch Start.
4.
5. At the successfully completed prompt, touch Close.
To exit the menu, touch X.
6.
7. To return to the Home screen, press the Home button.

Adjusting Paper Registration

Use Adjust Paper Registration to adjust the placement of the printed image on the page.
The adjustment allows you to place the top, bottom, left, and right margins exactly where you want.
You can specify the image position on both the front and back sides of the paper, for each installed
paper tray.
Verifying Paper Registration
At the printer control panel, press the Home button.
1.
2. Log in as administrator. For details, refer to Logging In as the Administrator.
3. Touch Device > Support > Image Position.
4. Select the source paper tray for the registration print.
a. Touch Paper Supply.
b. Touch the desired tray.
5. If your printer has automatic 2-sided printing, select the sides that you want to optimize.
− To select a sample registration page for adjusting side 1, touch Adjusted Side, then touch
Side 1.
− To select a sample registration page for adjusting both sides, touch Adjusted Side, then touch
Side 2.
6. Specify the consecutive number of sample pages to print.
Touch Print Settings.
a.
b. To increase or decrease the number of sample pages, for Quantity, touch Plus (+) or Minus (-),
then touch OK.
140 Xerox VersaLink
®
User Guide
C7000 Color Printer
®