Screws Used In The Printer (Hardware Kit) - Xerox Phaser 6100 Service Manual

7) Fuser Unit
Warning: The fuser melts toner onto the paper at a very high temperature, use care when handling the Fuser
or severe burns can result.
cool before handling. Do not touch the AC line (copper contact) on a main frame even after removing the fuser.

Screws Used in the Printer (Hardware Kit)

NO DESCRIPTION
S1 SCREW-MACHINE
S2 SCREW-TAPPING
S3 SCREW-TAPPING
S4 SCREW-TAPTITE
S5 SCREW-TAPTITE
S6 SCREW-TAPTITE
S7 SCREW-TAPTITE
S8 SCREW-TAPTITE
S9 SCREW-TAPTITE
S10 SCREW-ASS'Y MACH
When removing the fuser from a printer that has recently been operating, let the fuser
SPEC
2.6*4, GOLD
4*15, GOLD
3*8, GOLD
2.6*6, GOLD
3*8, BLACK
2*10, GOLD
3*6, GOLD
3*10 SILVER
3*6, GOLD
3*6, GOLD
NO DESCRIPTION
S11 SCREW-TAPTITE
S12 SCREW-TAPTITE
S13 SCREW-MACHINE
S14 SCREW-TAPTITE
S15 SCREW-TAPTITE
S16 SCREW-MACHINE
S17 SCREW-TAPTITE
S18 SCREW-SPICIAL
S19 SCREW-TAPTITE
S20 SCREW-TAPTITE
S21 COVER DIME SCREW
Disassembly
SPEC
3*6, GOLD
3*8, BLACK
3*8, SILVER
4*10 SILVER
3*6, GOLD
2*16, BLACK
4*6, YELLOW
3*10, BLACK
4*6, SILVER
3*12, YELLOW
EMBERGOLD
Service Manual 6-5