Xerox Phaser 6100 Service Manual page 64

Disassembly
4. Remove the transfer belt by releasing the lock levers on both sides.
Transfer
Belt
5. To remove the imaging unit, carefully lift the unit using the handle provided.
Imaging Unit
Caution
Ensure the drum surface is not scratched or damaged, while removing from the printer or after
placing it on a flat surface. Do not touch the surface of the drum. Exposing the drum surface to
direct light for more than 5 minutes will damage the drum, cover it with paper as shown below.
OPC Drum
6-8
Lever Lever
Paper