Hvps (High Voltage Power Supply) (Pl 9.1.20) - Xerox Phaser 6100 Service Manual

6.4.10 HVPS (High Voltage Power Supply) (PL 9.1.20)

Warning
High Voltage! Be sure to follow the steps outlined in Section 1.5.4 when servicing this assembly
1.
Remove the front cover and top cover. (6.4.1)
2. Remove the rear cover. (6.4.3)
3. Remove the main board shield. (6.4.7b)
4. Remove and free the CN7 harness from the main board.
5.
Remove 1 harness and 4 high-voltage harnesses from the HVPS.
Caution
Do not swap the HVPS wires, they are the same color, size, and shape. Note the wire connectors
and connection points for T1 and T2.
6. Free the white wiring harness through the channel in the chassis.
HVPS
CN7
USB
Harness
Red Red
Black Black
CHARGER
SUPPLY
CN1(to Deve Driver)
Harness
Black Black Red Red
Harness
Disassembly
T1
T2
CN2(to Deve OEM)
Service Manual 6-27