Xerox Phaser 6100 Service Manual page 32

Summary of Product
7) Feeder
Paper Arrangement: Side Registration.
Drive: Main Motor DC
Paper Management: Feed Clutch
8) Duplex Unit
The duplex unit is used to reverse paper feed to print the on backside of paper. The duplex unit is not an option.
The transfer roller is part of the duplex unit.
Duplex Unit Specifications
Drive: Main Motor DC
Paper Reversal: After the front side of the original document is printed and begins reaches the exit path, the
exit roller pulls the paper back through the duplex unit for printing on the reverse side.
9) Exit Unit
The exit unit guides the paper to the output tray.
Exit Unit Specification
Capacity : 250 sheets standard (20 lb)A4/Letter (There is no output tray full sensor)
Paper Direction: Face Down
Exit Roller Drive: Driven by the main motor DC, rotating clockwise for normal feed and counter-clockwise
to reverse feed for duplex printing.
10) Toner Cartridges
There are four toner cartridges, one each for C (Cyan), M (Magenta), Y (Yellow) , and K (Black).
11) Fuser Unit
The fuser unit consists of 2 heat lamps, 2 heat rollers, 2 thermostats and one thermister. After the image is
transferred from the transfer roller onto the media, the fuser melts and fuses the toner to the paper by applying
pressure and heat to complete the print job.
12) Laser Unit (LSU)
The laser unit forms the latent image on the surface of the drum using a static charge.
13) Main Motor (Brushless DC)
The main motor drives the following components: imaging unit, transfer belt, feeder, fuser, exit, and duplex unit.
Main Motor Specification:
Power: 40W Max (24V)
14) DEVE Drive Motor
The DEVE motor drives the toner cartridges and transfer belt cleaning cam.
DEVE Motor Specification:
Power : 40W Max (24V)
4-4