Konica Minolta bizhub 362 User Manual page 170

10
A screen appears, allowing you to enter the name that will appear on
the button.
6
Type in the recipient name that will
appear on the one-touch button, and
then press [Next].
– A maximum of 12 characters can
be entered.
7
Select the transmission mode, and
then press [Next].
– G3-1: Select when using port 1
for transmitting.
– G3-2: Select when using port 2
for transmitting.
This screen appears if optional fax
multi line is installed. If this screen
does not appear, continue with the
next step.
8
Use the keypad to type in the
telephone number of the recipient,
and then press [Next].
– A number up to 64 digits long can
be entered for the telephone
number.
– To add a pause of 3 seconds,
press [Pause]. "P" appears.
When transmitting to an outside
line, press [Pause] after the outside line access number (for
example, "0") to ensure that a connection is established.
If a country code and recipient's fax number is entered immediately
after the international dialing code, a busy signal may heard while
the number is dialed and the fax cannot be sent. In this case, press
[Pause] twice after entering the international dialing code, and then
enter the remainder of the telephone number after the six-second
pause. If the fax still cannot be sent, use the "Quick Scan TX"
function.
10-6
Registering/Settings
bizhub 362/282/222