Checking A Report For The Transmission Result ("Tx Report" Function); To Print The Transmission Report - Konica Minolta bizhub 362 User Manual
Facsimile operations
Hide thumbs
Also See for bizhub 362:
- Service manual (846 pages) ,
- User manual (450 pages) ,
- Installation manual (36 pages)
Table of Contents
Advertisement
Transmission applications
7.3
Checking a report for the transmission result ("TX
Report" function)
A report containing the transmission results can be printed. The machine can
be set to either print or not print the transmission report or to print it
according to the machine setting or only when a transmission fails.
To print the transmission report
1
Press [Fax/Scan] on the control panel to open the fax screen.
2
Press [FAX Menu].
3
Press [TX Report] on the Set 1
screen.
4
Select how to output the report, and
then press [Enter].
–
Default: The transmission report
is printed according to the
previously specified method. For
details, refer to "Settings for
Report Output" on page 11-50.
–
ON: The transmission report is
printed with each transmission.
–
If TX Fails: The transmission report is printed only if the fax could
not be sent.
–
OFF: The transmission report is not printed, regardless of the
transmission result.
5
Designate the destination. Set the original document.
6
Press [Start].
bizhub 362/282/222
7
7-11
Advertisement
Table of Contents
