Konica Minolta bizhub 362 User Manual page 195

Registering/Settings
10
If desired, press [F-CODE
Password], and then type in
password.
– Register a password for each
bulletin board.
– A maximum of 20 characters (0
through 9, # and *) can be
entered. The entered password
appears as asterisks (*).
Although a password was specified, why can't viewing be limited?
?
% The password is entered when limiting viewing of the bulletin board.
To specify the viewing limitations, press [Remote Input Check] or
[Remote Output Check].
11
Press [Remote Input Check].
12
Press either [ON] or [OFF] to specify
a setting for "Remote Input Check",
and then press [Enter].
– If "ON" was selected, type in an
F-code password.
What does the "Remote Input
?
Check" function do?
% This function specifies whether or
not registering a document on
this machine's bulletin board from another fax machine is regulated
with a password.
13
Press [Remote Output Check].
14
Press either [ON] or [OFF] to specify
a setting for "Remote Output
Check", and then press [Enter].
– If "ON" was selected, type in an
F-code password.
What does the "Remote Output
?
Check" function do?
% This function specifies whether or
not retrieving a bulletin board
document from another fax machine is regulated with a password.
bizhub 362/282/222
10
10-31