Konica Minolta bizhub 362 User Manual page 187

Registering/Settings
11
Specify the functions to be
programmed. After all of the desired
functions have been specified, press
[Enter].
– If desired, press [Quality],
[Menu 1] or [Menu 2], and then
specify the desired settings. For
details on the settings available
on the Quality screen, refer to
"Setting transmission conditions" on page 3-10. For details on the
settings available on the Menu 1 and Menu 2 screen, refer to
"Transmission applications" on page 7-3.
12
fter verifying the entered information,
touch [Enter].
To change a setting, press the button
for the setting to be changed, and
then specify the new setting.
13
Press [Enter] in each screen until the standby screen (initial screen)
appears.
Note
If software switch settings were specified to limit use of the FAX
Registration screen to the administrator, [FAX] does not appear in the
User Setting screen. In this case, destination can only be registered,
edited and deleted in Administrator mode. For details on the software
switch settings, refer to "Configuring Functions (Soft Switches)" on
page 11-67.
bizhub 362/282/222
10
10-23