Konica Minolta bizhub 362 User Manual page 85

Transmission
- Before a document is sent, the CSI signal received from the recipient's
machine is compared with the recipient's telephone number, and the
document is sent only if the CSI signal matches the recipient's telephone
number.
CSI (called subscriber ID) signal: Machine telephone number information
= International telephone number (including "+", telephone number
country code, area code and subscriber number)
- A transmission error occurs if the CSI signal is different from the recipi-
ent's telephone number or the CSI signal cannot be received.
- By adding a comparison number after the special character, the docu-
ment can be sent only if the comparison number matches the CSI signal.
Dialing method
Recipient's telephone number + special char-
acter "S"
Recipient's telephone number + special char-
acter "S" + comparison number
- The number of digits that are compared in the CSI signal and the
recipient's telephone number can be specified with the software switch
settings. As a factory default, the machine is set to "4 digits".
!
Detail
For details on transmitting using one-touch dial buttons, refer to
"Transmitting by a One-touch Key" on page 3-22.
For details on programming one-touch dial buttons, refer to
"Registering/Settings" on page 10-3.
For details on the software switch settings for checked receiver transmis-
sions and the number of digits that are compared, refer to "Configuring
Functions (Soft Switches)" on page 11-67.
bizhub 362/282/222
Method for checking the recipient's ma-
chine
The CSI signal and recipient's telephone
number are compared.
The CSI signal and comparison number are
compared.
3
3-33